User's Manual

13
Using the Configuration Utility (continued)
Home > DHCP
DHCP Server: Select Enabled or Disabled. Disabled is the default setting. If
you want to use the Access Point as a DHCP server to automatically assign Dynamic
IP Addresses on the network, you will select Enabled.
Starting IP Address: If you have enabled the DHCP server function, enter the
starting point of the IP Address range for your network
Ending IP Address: Enter the ending IP Address of your IP Address range, if you
have enabled the DHCP function of the Access Point
Lease Time: Choose the length of time at which the DHCP function of the
DWL-700AP automatically regenerates the IP Addresses to the devices in your
network
DHCP Client Table: Lists the devices on your network that are receiving dynamic
IP Addresses from the Access Point