User's Manual

13
Using the Configuration Menu (continued)
Advanced Setup>Access Point>Configuration>IP Address
This window displays the default settings of the 11g WIRELESS LAN ACCESS POINT.
Get IP From:
Choose
Manual
or
Auto
. If you select
Manual
you will manually input the
IP Address. If you select
Auto
the DHCP server on your network will automatically assign
an IP Address.
IP Address: The default IP Address is 10.0.0.1.
Subnet Mask: The Subnet Mask is 255.0.0.0
Default Gateway: Input the IP Address of the Default Gateway (the router in the
network).
Click Apply if you have made any changes.
Note: In the Configuration screens that follow, you will be able to configure settings
for 802.11g devices in your network. Settings that you input for 802.11g devices will
also apply to 802.11b devices in your network.