User's Manual

Table Of Contents

Getting Started (continued)

An Infrastructure wireless network contains an Access Point or Router. The

Infrastructure Network example, shown here, contains the following D-Link network

devices:

For a typical wireless setup (as shown above,) please do the following:

1. You will need a broadband Internet access (Cable/DSL) subscription

2. Consult with your Cable/DSL provider for proper installation of the modem

3. Connect the modem to an Ethernet broadband router such as the

DI-604. (See the Quick Installation Guide included with the DI-604.)

4. Connect the router to the D-Link Air Xpert DWL-7000AP. (See the Quick

Installation Guide included with the DWL-7000AP.)

5. If you are connecting a desktop computer in your network, you can install the

D-Link Air Xpert DWL-AG520 wireless PCI adapter into an available PCI slot.

(See the Quick Installation Guide included with the DWL-AG520.)

6. Install the drivers for the D-Link Air Xpert DWL-AG650 into the laptop

computer. (See the Quick Installation Guide included with the DWL-A650.)

Ethernet Router