User's Manual

15
Using the Configuration Utility (continued)
Advanced > Grouping
Select Enabled or Disabled.
Click Apply to save the changes.
Load Balance-
User Limit (0-64)-
Link Integrate-
Ethernet Link
Status-
Click Apply-
When you Enable Load Balance you allow several DWL-2700APs to balance
wireless network traffic and wireless clients among the DWL-2700APs in the
network. Assign each access point a different non-overlapping channel (e.g., 1,
6, 11).
Set the User Limit in this field (0-64).
When Link Integrate is Enabled, whenever the Ethernet connection
between the LAN and the AP is disconnected - then the wireless
segment associated with the AP will also be disconnected from the AP.
Select Enabled or Disabled.
This field displays the Ethernet Link Status. Link Up indicates
that there is an Ethernet LAN connection to the AP.