Installation Instructions

Appendix (Continued)

Using the Configuration Utility

A. Status: Displays the

MAC Address of the

Access Point that is

associated with the

DWL-AG520.

B. SSID: The Service Set

Identifier is the name

assigned to the wireless

network. The factory

SSID setting is set to

default.

F. TxRate: The default

setting is Auto; meaning,

TxRate settings are

automatically determined

by the DWL-AG520

depending on the

distance from the access

point.

H. Signal Strength: Displays the Link Quality for the

DWL-AG520 wireless connection to the access point.

The Signal Strength represents the wireless signal

between the access point and the DWL-AG520. The

percentage coincides with the graphical bar.

G. Channel: Displays the channel

information. By default, the channel is

set to 6. Please note that the DWL-

AG520 will automatically adjust channel

depending on the Access Point.

C. Frequency

Displays the

current fre-

quency used

by the adapter.

D. Wireless Mode: The factory setting is set to Infrastructure. Ad-Hoc mode is used for

peer-to-peer networking.

E. Encryption: Displays the current encryption status of the wireless connection.

I. Packet

Count: Graphi-

cally displays

the statistics of

data transmitted

and received.