User's Manual

Antenna

The DWL-AB520 Wireless PCI Adapter has two mode for external

antenna and internal antenna. As below:

For external antenna: (Please refer to the figure 1)

1. Remover the back cover of the computer

2. Install the DWL-AB520 PCI Adapter carefully and firmly into an

available CPI slot.

3. Pass the wireless antenna through the hole on the back panel

4. Secure the screw and replace the computer cover

5. Put the antenna into the antenna stand

For internal antenna, the installation instruction as follows and performed

by D-Link authorized OEM company at factory. (Please refer the figure 2

and 3)

1. Remove the back cover of the computer.

2. Install the DWL-AB520 PCI Adapter carefully and firmly into an

available PCI slot.

3. The internal antenna should be installed on the front panel of the

computer by D-Link authorized OEM company at factory.

4. Find the internal antenna plug in the computer chassis.

5. Insert this internal antenna plug carefully and firmly into the

receptacle on the DWL-AB520 PCI Adapter.

6. Replace the computer’s cover.

Warning: This internal antenna is not allowed to be installed by the end

user.