User's Manual

Troubleshooting (continued)

Configuration in the Networking Basics section of this manual

for more information.)

• If Enable Security is selected, make sure that the correct

encryption keys are entered on both the wireless clients and the

access points. (Please see Checking the Wireless

Configuration in the Networking Basics section of this manual

for more information.)

4. The wireless client cannot access the Internet in the

Infrastructure mode.

•• Make sure the wireless client is associated and joined with the

correct Access Point. To check this connection: Right-click on

the Networking Icon in the taskbar> select View Available

Wireless Networks. The Connect to Wireless Network screen

will appear. Please make sure you have selected the correct

available network, as shown in the illustrations below.

•• Check that the IP Address assigned to the wireless adapter is

within the same subnet range

as the access point and gateway.

To check the IP Address assigned to the wireless adapter,

double-click on the Network Connection Icon in the taskbar >

select the Support tab and the IP Address

will be displayed.

(Please refer to Checking the IP Address in the Networking

Basics section of this manual.)

•• If it is necessary to assign a static IP Address to the wireless

adapter, please refer to the appropriate section in Networking

Basics.