User's Manual

1. A Home Internet Network with A Residential Gateway/Router

(continued)

(Requirements: A Residential Gateway/Router connected with an

Ethernet (CAT5) cable to an 802.11a/b Access Point such as the DWL-

5000AP.)

This type of installation requires that you provide a dynamic IP address

for each computer on your network. You will need a DHCP-capable

Residential Gateway/Router for your network.

To complete the installation, please follow these steps:

1. Connect the Router/Gateway (for example, the D-Link DI-704P)

to a Broadband connection, (e.g., a Cable modem such as the D-

Link DCM-200 cable modem or a DSL modem such as the D-

Link DSL-300.)

2. Connect the 802.11a/b Access Point (DWL-5000AP

) to the router.

3. Install the D-Link DWL-AB520 Wireless PCI Adapter into a

desktop computer on your wireless network. (You can also install

the Wireless Cardbus Adapter into a laptop computer. Please

refer to the Quick Install Guide included with each product.)

DHCP stands for

Dynamic Host

Configuration Protocol.

It is a protocol for

assigning dynamic IP

addresses

“automatically.” With a

DHCP-capable

gateway, there is no

need to manually

assign an IP address.