User's Manual

Installation

This section shows you how to install the Utility if you are using Windows

2000, 98, ME, or NT operating systems. Follow the instructions given below

on how to install the hardware (DWL-520 PCI Adapter) and then the

software (driver and utility). For those using Windows XP, the installation

procedure will be the same until the utility installation. Windows XP has a

built in utility for wireless devices. The configuration utility does not need to

be installed for users using the XP operating system.

System Requirements:

• A desktop computer with an available 32-bit PCI Card slot

• At least a 300 MHz processor and 32 MB of memory

• PCI Controller properly installed and working

• An 802.11b Access Point (for Infrastructure Mode) or another

802.11b wireless adapter (for Ad-Hoc mode.)

1. Installing the DWL-520

• Turn on the computer

•

Insert the DWL-520

Wireless PCI Adapter

into an available 32-bit

Cardbus PC Card slot.