User's Manual

Please note that this type of installation requires that your ISP (Internet
Service Provider) provides you a static IP address for each computer and
the Access Point on your network. Please refer to the manual that came with
your Access Point to determine its configuration.
Please follow these steps to complete the installation:
1. Connect the Wireless Access Point to a Broadband connection (i.e.,
a Cable modem.)
2. Install the DWL-520 Wireless PCI Adapter into the desktop
computer(s) on your wireless network. (You can also install the
WCB-B13 Wireless Cardbus Adapter into your laptop computers.)
3. Check the Device Manager to confirm that the wireless adapter is
installed correctly. Please refer to the Networking Basics section in
this manual entitled: Checking the Installation of the Drivers for
the Wireless Adapter.