User's Manual

Troubleshooting (continued)
5. Resetting the DWL-5000AP to Factory Default Settings
After you have tried other methods for troubleshooting your network, you
may choose to Reset the DWL-5000AP to the factory default settings.
Remember that all 802.11a D-Link AirPro products network together, out
of the box, at the factory default settings.
To hard-reset the D-Link AirPro DWL-5000AP to Factory Default Settings,
please do the following:
• Locate the Reset button on the back of the DWL-5000AP
• Use a paper clip to press the Reset button.
• Hold for about 5 seconds and then release
• After the DWL-5000AP reboots (this may take a few moments) it will
be reset to the factory Default settings.