User Manual

- 5 -
radio transmission, such as metal objects, electronic devices, cordless telephones, and
microwave oven.
z If necessary, move your notebook computer a few inches to find a better signal.
Environmental condition varies with users’ location, a difference of one or two inches
can mean the difference between a strong and a weak signal. Even a slight change in
PC orientation can improve a wireless connection.
z
If you have installed the Configuration Utility, you may use the Signal Strength display
in the Link Info to determine the best location and orientation for a wireless network
connection.
LED Indication
The yellow LED of Wireless LAN CF Card performs identical functions when indicating the
operational status of the card.
Advanced Configuration
Configuration
Mode (Network Mode)
1. Ad-Hoc: The Ad-Hoc network is also known as a peer-to-peer network. An Ad-Hoc
networking do not need Access Point. Instead, the Ad-Hoc network is a loose
association of wireless computers that can communicate with each other using Wireless
LAN CF Card in Ad-Hoc Mode
2. Infrastructure: In a wireless infrastructure network, wireless stations communicate with
an Access Point to connect to a wired network. An infrastructure network also can
consist of multiple Access Points. This can extend the coverage area of wireless
network. In this configuration, the wireless network consists of cells. Each cell is a single
Access Point that has different frequency channel to prevent from interference each
other. A wireless station can move from one Access Point to another without losing the
network connection.
SSID
The SSID is the name of wireless network for Ad-Hoc or Infrastructure mode. To add a
Wireless LAN CF Card to an existing wireless network, configure this one with the name of
the wireless network
Tx Rate
The Fixed 1, 2, 5.5, 11Mb/s or Fully Auto transmit rates can be selected for Wireless LAN