User Manual

- 3 -
Installation
Installation for Windows 95, Windows 98 and Windows 2000
Before installing the driver, you will need a copy of the operating system installation media,
usually a CD supplied with your computer or operating system.
On Windows 98 systems, the installation files are sometimes archived on the hard disk in
C:\WINDOWS\OPTIONS\CABS. On Windows 2000 systems, the system may prompt you to
load operating system files from the Windows 2000 installation disk. Installation under
Windows 95 is identical to the procedure given above for Windows 98 and Windows 2000.
Only Windows 95 OSR2 or higher is supported.
The Setup program also installs Configuration Utility in the Wireless LAN CF Card in the
Program directory. This configuration utility can help you to understand and maintain your
Wireless LAN.
Install Driver
Step 1: Turn on your computer.
Step 2: Insert the Wireless LAN CF Card into the CF Card slot. Align the card properly
before putting it in the slot. Insert the card firmly without forcing until it seats snugly.
CAUTION: Forcing a misaligned card into the slot can damage the computer or the card.
Step 3: Windows finds a new hardware shown DLINK-DW650 and asks for the driver of
Wireless CF Card. The driver installation wizard guides you through the steps standard for
your operating system.
Step 4: You will be asked to supply CDs or directory path information for the driver. This
driver shall be located in the following directory.
D:\DW650\ (if D:\ is your CD-ROM drive)
Step 5: Windows finds the driver described as Wireless LAN CF Card. Follow the directions
of Windows dialog boxes to complete the driver installation. After completing the installation,
Windows dialog will display Systems Setting Change and ask to restart the notebook.
Please click Yes to reboot the computer.