User's Manual

- 3 -
Installation
Installation for Windows 95, Windows 98 and Windows 2000
Before installing the driver, you will need a copy of the operating system installation media,
usually a CD supplied with your computer or operating system.
On Windows 98 systems, the installation files are sometimes archived on the hard disk in
C:\WINDOWS\OPTIONS\CABS. On Windows 2000 systems, the system may prompt you to
load operating system files from the Windows 2000 installation disk. Installation under
Windows 95 is identical to the procedure given above for Windows 98 and Windows 2000.
Only Windows 95 OSR2 or higher is supported.
The Setup program also installs Configuration Utility in the WLAN MiniPCI Card in the
Program directory. This configuration utility can help you to understand and maintain your
Wireless LAN.
Install Driver
Step 1: Insert the WLAN MiniPCI Card into the MiniPCI socket of Notebook.
Step 2:. Turn on your computer.
Step 3: Windows finds a new hardware shown WLAN MiniPCI and asks for the driver of
WLAN MiniPCI Card. The driver installation wizard guides you through the steps standard
for your operating system.
Step 4: You will be asked to supply CDs or directory path information for the driver. This
driver shall be located in the following directory.
D:\ (if D:\ is your CD-ROM drive)
Step 5: Windows finds the driver described as WLAN MiniPCI Card. Follow the directions of
Windows dialog boxes to complete the driver installation. After completing the installation,
Windows dialog will display Systems Setting Change and ask to restart the notebook. Click
“Yes” to reboot the computer.
Install Configuration Utility
1. Restart the computer and ensure ireless LAN Configuration Utility CD in the CD-ROM
drive.