Download

16
Mounting the Switch on a Rack
The DGS-1016A/1024A can easily be mounted on a rack. Two
mounting ears are provided for this purpose. Make sure that the front
panel is exposed in order to view the LEDs. Please refer to the
following illustrations:
The DGS-1016A/1024A can also be mounted on a wall. Two mounting
slots are provided on the bottom of the switch for this purpose. Please
make sure that the front panel is exposed in order to view the LEDs.
Please refer to the illustration below:
A.) Mounting on a cement wall
1. Mount the Nylon screw anchors into a cement wall.
2. Drive the T3 x 15L screws into the Nylon screw anchors.
3. Hook the mounting holes of the switch back on the screws;
you have completed the wall-mount.
B.) Mounting on a wood wall
1. Drive the T3 x 15 L screws into the wood wall.
2. Hook the mounting holes of the switch back on the screws;
you have completed the wall-mount.