D-Link™ DES-1226G Web-Smart 24-Port 10/100Mbps+2-Port Combo 10/100/1000Mbps Copper/SFP(Mini GBIC) Gigabit Switch Manual Second Edition Building Networks for People RECYCLABLE
Contents 1. Package Contents ..................................................................................3 2. Introduction ..................................................................................................3 Ports 1-24 Status LEDs ..................................................................................................5 Ports 25 & 26 Status LEDs .............................................................................................
1. Package Contents One 24-Port 10/100Mbps+2-Port Combo 10/100/1000Mbps Copper/SFP(Mini GBIC) Gigabit Smart Switch One AC power cord Four rubber feet to be used for shock cushioning Screws and two mounting brackets Quick Installation Guide CD-Rom with Web Management Utility and Manual If any of the above items are missing, please contact your reseller. 2.
VLAN (Virtual Local Area Network) A VLAN is a group of end-stations that are not constrained by their physical location and can communicate as if a common broadcast domain, a LAN. The primary utility of using VLAN is to reduce latency and the need for routers, by using faster switching instead. Other VLAN utilities include: Security: Security is increased with the reduction of opportunity in eavesdropping on a broadcast network because data will be switched to only those confidential users within the VLAN.
Features and Benefits (24) 10/100BASE-TX Fast Ethernet ports + (2) 1000BASE-T Gigabit Ethernet ports or (2) SFP(Mini GBIC) for 2 additional copper or fiber Gigabit connections Auto MDI/MDI-X support on each port Full-/half- duplex transfer mode for 10/100Mbps Fast Ethernet transmission Full-duplex transfer mode for Gigabit Ethernet transmission Wire-speed reception and transmission Store-and-Forward switching method Integrated address Look-Up Engine, supports 8K MAC addresses Supports 256K bytes RAM for dat
100Mbps On When the LED light is on, the respective port is connected to a 100Mbps Ethernet network. Off When the LED light is off, the respective port is connected to a 10Mbps Ethernet network, or no link. Ports 25 & 26 Status LEDs Link/Act On When the LED lights on, the respective port is connected to a 10/100/1000Mbps Ethernet network. Blinking When the LED is blinking, the respective port is transferring or receiving data on a 10/100/1000Mbps Ethernet network. Off No link.
crossover cable. 10/100/1000BASE-T Twisted Pair Ports (Port 25~26) The DES-1226G is equipped with two Gigabit twisted pair ports that are auto negotiable 10/100/1000Mbps and also support auto MDI/MDIX crossover detection. These two ports can operate in half- and full- duplex modes. SFP(Mini GBIC) Ports (Option Port 25~26) The Switch is equipped with two SFP(Mini GBIC) ports, supported optional 1000BASE-X SFP(Mini GBIC) module. Note: When the port is set to “Forced Mode”, the Auto MDI/MDIX will be disabled.
Use the screws provided. Then, use the screws provided with the equipment rack to mount the Switch in the rack. Mount the Switch in the rack. Connecting Network Cable The DES-1226G supports 10/100/1000Mbps Gigabit Ethernet. It runs full-/half- duplex transfer mode for 10/100Mbps and full-duplex transfer mode for 1000Mbps. Each port on the DES-1226G supports Auto-MDI/MDI-X.
Figure 1. Web Management Utility The Web Management Utility is divided into four parts, Discovery List, Monitor List, Device Setting, and Toolbar function. For detailed instruction, follow the section below. Discovery List This is the list where you can discover all the D-Link Web-Smart devices in the entire network By clicking on the “Discovery” button, you can list all the Web-Smart devices in the discovery list.
Figure 3. Note: In order to receive Trap information, the Switch has to be configured with Trap IP and Trap Events in Web browser, available in the Trap Setting Menu (see Page 40 for details). Add Item: To manually add a device to the Monitor List, enter the IP Address of the device that you want to monitor. Delete Item: To delete the device in the Monitor List. Device Setting You can set the device by using the function key in the Device Setting Dialog box.
Firmware Upgrade: When the device has a new function, there will be a new firmware to update the device. You can use this function to upgrade the firmware. Figure 6. Web Access: Double click the device in the Monitor List or select a device in the Monitor List and press the “Web Access” button to access the device in the Web browser. Toolbar The toolbar in the Web Management Utility have four main tabs: File, View, Options, and Help.
Configuring the Switch The DES-1226G has a Web GUI interface for smart switch configuration. The Switch can be configured through the Web browser. A network administrator can manage, control, and monitor the Switch from the local LAN.
Figure 10.
Configuring Setup Setting There are four items, including Port Settings, VLAN Settings, Trunk Settings, Mirror Settings and Static MAC in Setup menu. Port Settings The Port Settings menu page (Figure 11) displays each port’s status. Click on the ID parameter to set each port’s Speed, Flow Control, QoS priority, and Link Status. When you need to renew the posted information, press the “Refresh” button. The Link Status in the screen will show the connection speed and duplex mode.
Figure 13. VLAN Group Settings Once you want to modify the VLAN Group, check on the ID parameter; the ID VLAN configuration window will appear. Figure 14. VLAN Settings Trunk Setting The Trunk function enables you to cascade two devices with a double times bandwidth (up to 4000Mbps in full-duplex mode). There are two trunking groups for selection; you can select either or both groups for trunking. Figure 15.
Static MAC The Static MAC function allows you to enable the Switch to forward the data packets to specific MAC address and specific port. Only Static MAC function enabled ports will follow the Static MAC rule from the Static MAC list. Enabled / Disabled: Selecting the enable or disable Static MAC function on the Switch.
System Setting The System Setting includes the System name, Location name, Login Timeout, IP Address, Subnet Mask, and Gateway. Through the Web Management Utility, you can easily recognize the device by using the System Name and the Location Name. The Login Timeout is to set the idle time-out for security issues. When there is no action when running the Web Smart Utility, and it times out, you must re-login to Web Smart Utility before you set the Utility.
To restore a current settings file to the device, you must specify the backup file and click on the “Restore” button to process the setting of the recorded file. Figure 23. Backup Setting Note: when restoring a recorded file, the current password will not be erased. Reset Setting The Factory Reset button helps you to reset the device back to the default settings from the factory. Be aware that the entire configuration will be reset; the IP address of the device will be set to default setting of 192.168.0.
AC inputs 100 to 240V AC, 50/60 Hz internal universal power supply Power Consumption 16 watts. (max.) Temperature Operating: 0°~40°C, Storage: -10°~70°C Humidity Operating: 10%~90%, Storage: 5%~90% Dimensions 440× 140× 44 mm (W × H × D) 17.32 X 5.51 X 1.
Submitting A Claim: The customer shall return the product to the original purchase point based on its return policy. In case the return policy period has expired and the product is within warranty, the customer shall submit a claim to D-Link as outlined below: • The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance in sufficient detail to allow D-Link to confirm the same.
Register online your D-Link product at http://support.dlink.
Warranty and Registration Information (All countries and regions excluding USA) Wichtige Sicherheitshinweise 1. Bitte lesen Sie sich diese Hinweise sorgfältig durch. 2. Heben Sie diese Anleitung für den spätern Gebrauch auf. 3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Vervenden Sie keine Flüssig- oder Aerosolreiniger. Am besten dient ein angefeuchtetes Tuch zur Reinigung. 4.
After an RMA number is issued, the defective product must be packaged securely in the original or other suitable shipping package to ensure that it will not be damaged in transit, and the RMA number must be prominently marked on the outside of the package. The package must be mailed or otherwise shipped to D-Link with all costs of mailing/shipping/insurance prepaid.
International Offices U.S.A 17595 Mt. Herrmann Street Fountain Valley, CA. 92708 TEL: 714-885-6000 Fax 866-743-4905 URL: www.dlink.com Norway Karihaugveien 89 1086 Oslo Norway TEL: 47-22-309075 FAX: 47-22-309085 URL: www.dlink.no Canada 2180 Winston Park Drive Oakville, Ontario, L6H 5W1 Canada TEL: 1-905-8295033 FAX: 1-905-8295223 URL: www.dlink.ca Finland Pakkalankuja 7A 01510 Vantaa, Finland TEL : +358-9-2707 5080 FAX: + 358-9-2707 5081 URL: www.dlink.fi Europe (U. K.
URL: www.dlink.com.tr Sweden P.O. Box 15036, S-167 15 Bromma Sweden TEL: 46-(0)8564-61900 FAX: 46-(0)8564-61901 URL: www.dlink.se Egypt 19 El-Shahed Helmy, El Masri Al-Maza, Heliopolis Cairo,Egypt. TEL:+202 414 4295 FAX:+202 415 6704 URL: www.dlink-me.com Denmark Naverland 2, DK-2600 Glostrup, Copenhagen, Denmark TEL: 45-43-969040 FAX: 45-43-424347 URL:www.dlink.dk 25 Headquarters 2F, No. 233-2, Pao-Chiao Rd. Hsin-Tien, Taipei Taiwan TEL: 886-2-2916-1600 FAX: 886-2-2914-6299 URL: www.dlink.com.
Registration Card ( Excluding USA) Print, type or use block letters. Your name: Mr./Ms______________________________________________________________________ Organization: ________________________________________Dept.
