MSDS
MATERIAL SAFETY DATA SHEET
According to US Regulation ANSI Z400.1-2004
5. FIRE-FIGHTING MEASURES
Flash point: Greater than 93.3º C (>200º F).
May be combustible at high temperature.
Flammability Limits in Air:
Lower No information available.
Upper No information available.
Autoignition Temperature: No information available.
Suitable Extinguishing Media: As suitable for surrounding fire.
Extinguishing Media which must not
be used for safety reasons:
No information available.
Specific hazards: Not applicable.
Unusual hazards: None known.
Special Protective Equipment for Fire
Fighters:
As in any fire, wear self-contained breathing apparatus, pressure-demand, MSHA / NIOSH
(approved or equivalent) and full protective gear.
Precautions for Fire Fighters: Standard procedure for chemical fires.
Key: Personal Protection Index = B.
(Also see Sections 3 & 8)
6. ACCIDENTAL RELEASE MEASURES
Personal Precautions: Ensure adequate ventilation.
Environmental Precautions: Do not allow material to contaminate ground water system. Prevent product from entering
drains. Local authorities should be advised if significant spillages cannot be contained.
Methods for Cleaning Up Small spillage:
Avoid dust formation
Sweep up and shovel into suitable containers for disposal
Remaining spill residues of dust may be wiped up with paper towels or flushed into sink or
sanitary system with water
Large spills should be diked, contained and collected for later disposal according to local,
provincial, state or federal regulations.
Flammability: 0
Flammability: 0
Reactivity: 0
Instability: 0 NFPA:
Health Hazard: 2
HMIS:
Validation/Revision Date:
29-Sep-2008
M SDS No.:
356068PSDS
Version No.:
3
Product Name:
D-CON REA DY MIXED BAITBITS
Health Hazard: 2
Page 3 of 9
11-June-2009