REINFORCED GEARBOX WITH 7MM BEARING METAL HOP-UP CHAMBER SET Always read through this manual before operation.
OTHER PARTS =~ SETTING THE OPEN SIGHT Rear Sight 1. For left-right adjustment. Battle sight {For common shooting) Special charger Used for full automate nonchargeable | Turning clockwise Turning counterclockwise gy Raises the bullet hitting point Lowers the bullet hitting point Rear Sight. For precision targeting TACTICAL 3 PINT SLING » Battle oversight manually) Battle sight Incorporate shooting Used for precision firing m—— e R Precision battleship Turning tha dial Up will raise the puller hitting point.
SELECTOR LEVER AND SAFETY SETTING SAFETY SETTING SAFETY ON 0 SAFETY Make sure the knob for choosing shoot way sis moved 'SAFE place. SAFETY OFF When the knob moves to this place, you can only shoo tone bullet each time. SAFETY OFF Entrancement Width: Approx.
SETTING THEREUPON Pulling the charging handle will expose the hop up | Loosen the interlace knob and remove adjustment dial in the part cover. ' the Carrying Handle as shown. W Mount rail Scopes can be all ached to the Mount rail The prof must be closed manually, . Exhilarating Disarm Halal Hoo chambray rubidium packing Be sure that the adjustment \a Fin Bar dial is never contaminated camp -2 e bydusianddint _ Mount fair The best position is where the bullets fly horizontally, and the longest flying distanc
Discharge the battery completely before charging it for the first time and the charging time is 12 hours. Battery charging time is about 7-8 hours, do not extra to avoid the over-charge. The temperature can't over 45 during charging or will damage to the battery. Rechargeable batteries air not to be removed from the toy before being recharged(if remove}. Batteries are lo be inserted with correct polarity. Exhausted batteries are {o be removed from the loy.
