User's Manual

How to Connect your AV Receiver (or audio source) to the HaptiSync Hub

In some situations, it may be more convenient for you to connect your AV Receiver directly to your HaptiSync Hub. In this

case, an analogue stereo mix must be sent from your AV Receiver to the AUDIO IN jack (3.5 mm stereo) on your HaptiSync

Hub (see sections 4.2.1 to 4.2.3):

Recommended Connection Setup

Connect the analogue Stereo Downmix output from any AV source to the HaptiSync Hub AUDIO IN jack:

Alternate HDMI Connection Setup

Connect the HDMI OUT from your AV source to an HDMI Multichannel to 2CH converter and output a Left/Right

Downmix to the HaptiSync Hub. Please note that some audio formats can’t be converted using this type of converter

(Dolby Atmos, Dolby TrueHD, etc.). Verify the manufacturer specs prior to installation:

Alternate Optical or Coaxial Connection Setup

HaptiSync Hub AUDIO IN jack