User's Manual

3.2 Power Operation Button Functionalities

The power operation button on your HaptiSync Hub has different functionalities. If you press the button for:

• 1 second, then release: Power on/off

• 6 seconds, then release: Network reset (while blinking twice per second)

• 10 seconds, then release: Factory reset (while blinking 4 times per second)

• 12+ seconds: Nothing (cancels all operations)

3.3 Content Synchronization using the AUDIO IN Jack

This option allows you to connect an analogue stereo source to the AUDIO IN jack on your HaptiSync

Hub.

This option is suitable for the following situations:

• If you want to watch a movie from your tablet, smartphone or laptop with wired headphones.

• If your HaptiSync Hub is located outside of your entertainment room and/or connected to your AV Receiver.

• If your HaptiSync Hub cannot be properly positioned in the room.

• If you keep getting synchronization errors when using the integrated sound sensor because the sound level is too

low.

NOTE: make sure that you select the Audio Line-In mode in the HaptiSync App.

How to Connect a Tablet, Smartphone or Laptop to Headphones

When using headphones to watch a movie, the integrated sound sensor cannot detect the room’s sound. Therefore, you

need to route the audio through the analogue AUDIO IN jack.

*This configuration requires a stereo audio splitter (not included).

**A Lightning to Audio Jack Converter may be required for Apple devices.