User's Guide

Safety Instructions
2
SAFETY INSTRUCTIONS
Failure to comply with the following safety instructions can result in injuries to people or damage to equipment:
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this device near water.
6. Only clean the device with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves or any other appliances (including
amplifiers) that produce heat.
9. Protect the USB cord from being walked on or pinched, particularly at the ends.
10. Use only attachments/accessories specified by the manufacturer.
11. Unplug this device during electrical storms or when unused for long periods of time.
12. Refer all servicing to qualified personnel. Servicing is required when the device has been damaged in any way. For
example: If liquid has been spilled or objects have fallen onto it, if it has been exposed to rain or moisture, if it does not
operate normally or, it has been dropped.
WARNING: To reduce the risk of fire or electric shock, do not expose this device to rain or moisture.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert
the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that
may be of enough magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature
accompanying the product.
This symbol indicates that you must communicate with the manufacturer for disposal of the
equipment.