User's Guide

8
HP-R300 SETUP
HARDWARE
1. Carefully unbox your HP-R300 and remove it from the plastic bag.
2. Please read the online Terms and Conditions before breaking the seal on the box containing your cables. Read and
keep all documents contained in the cable box.
3. Plug the USB cable from the KAI-1P or KCU into the port at the back of the HP-R300 - KAI-1P and KCU sold
separately.
4. Connect your motion platform to your KAI-1P or your KCU - see details on page TBD.
5. Connect an analog stereo downmix audio source from your home theatre A/V source (output) to the HP-R300 3.5
mm (1/8 inch) audio-in port. It can also be connected via an external converter that accepts Coaxial Audio, Toslink or
HDMI connections - see suggested converters on page TBD.
6. Connect the power cord and AC adaptor. Plug the power cord into an electrical outlet.
7. Power up the HP-R300.
COOLING
It is normal for the device to heat up. Allow some space above the device for proper heat dissipation.