Specifications

TI 323 (6.0E)
4 - 36
* 1 m, free field; Broadband measurement, pink noise, crest factor 4,
peak measurement, linear weighting
** Dispersion angle vs frequency plotted using lines of equal sound pressure
(isobars) at –6 dB and –12 dB
Dimensions in mm [inch]
Weight (incl. wheels): 52 kg/117 lb
Dimensions in mm [inch]
Weight: 26 kg/57 lb
MAX dispersion characteristics**
1. The loudspeakers and their characteristics
MAX
85 Hz -18 kHz / 133 dB SPL*
60° conical
MAX is a passive full range system with a 15"/2"
coaxial driver. MAX is available with flying studplates
as an option and therefore can be integrated into
flown set ups as a dedicated C4 downfill. The shape
of the cabinet also allows horizontal arraying of
multiple MAX cabinets when used as a stacked near
field system. To ensure correct coherence with d&b
subwoofers it is recommended to use a P1200A fitted
with ampMAX (passive mode) or AMP/L modules.
C7-TOP
68 Hz -18 kHz / 136 dB SPL*
75° horizontal x 40° vertical
The C7-TOP is equipped with a 15"/1.5" coaxially
mounted hornloaded driver combination in a vented
enclosure. The use of coaxial horns gives the C7-TOP
a controlled, even dispersion pattern from a compact
cabinet. The high output capability of the C7-TOP
allows it to operate in the most demanding PA
applications. With a horizontal dispersion of 75°
making it ideal to complete a C4 array covering mid
to near field areas and side seating tiers. In
combination with the C4-SUB, the C7-TOP must be
operated in CUT mode only.