Specifications

TI 323 (6.0E)
28 - 36
9. Examples
Positioning and placement of the cabinets next to
each other and relative to the audience needs careful
attention in order to achieve the best performance of
a loudspeaker system. Some major issues have been
explained above, the following section illustrates
examples of standard applications.
All drawings show PA left, viewed from front of
house.
These examples are guidelines for a final system
design. This is a compilation of proven set ups that
can be adapted to particular situations, in most cases
by simply modifying a few angle settings, or
exchanging cabinets.
9.1. Example 1:
The basic C4/B2 configuration:
4 x C4-TOP, 4 x C4-SUB, 1 x B2-SUB, 2 x P1200A
with mixed C4-TOP/C4-SUB controller modules,
1 x A1 with a B2 controller module. This is suitable for
medium sized venues and provides a nominal 70°
horizontal dispersion.
9.2. Example 2:
6 x C4-TOP, 6 x C4-SUB, 2 x B2-SUB, 3 x P1200A
with C4-TOP/C4-SUB controller modules and
2 x A1 with a B2 controller module.
This shows the system scaled up from example one to
give 90° horizontal dispersion and high power low
end.
The same system in a flown configuration. This system
is suitable for venues or outdoor events up to
approximately 2,000 people. Flown systems provide a
more even level distribution. Depending on the trim
height, the use of additional frontfill systems may be
advantageous.