Specifications

TI 323 (6.0E)
27 - 36
8.5. Loudspeaker aiming
As an enhanced planning aid TransCalc and
InstallCalc are able to calculate the aiming of the
individual TOP cabinets towards the listener planes.
This is very important when using C3s in the array,
due to their precisely shaped wave front.
Three sections can be defined, the floor area, side
and rear tiers. Whether the audience is sitting or
standing can also be defined. According to chapter 6.
System design, the density of the main axis of the
loudspeaker is proportional to the distance from the
array to the audience area. To avoid disruptive
reflections from the rear or side walls, ensure that the
main axis of the long throw component only just hits
the listening plane at the farthest point.