User manual

(5.0E) 2-13
P1200A enclosure dimensions mm [inch]
483 [19.00"]
443 [17.44"]
348 [13.70"]
338 [13.31"]
323 [12.72"]
132 [5.20"]
5 [0.20"]
P1200A object addresses for remote operation with the d&b RIB
Address
Read/
Write Object Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 RD Status Base Device Gnrl-Error SW-Rem LockCmd LockMode PWR Ok PWR On
0 WR Status Base Device LockCmd PWR On
2 RD/WR Potentiometer A Attenuation in steps of 0.5dB, 7-bit coded (0=+6dB, 127=–57.5dB)
3 RD/WR Switch Settings A MUTE Switch 3 Switch 2 Switch 1
4 RD/WR Potentiometer B Attenuation in steps of 0.5dB, 7-bit coded (0=+6dB, 127=–57.5dB)
5 RD/WR Switch Settings B MUTE Switch 3 Switch 2 Switch 1
8 RD Errors Base Device Tmp Error Tmp Warn AMP Prot. B AMP Prot. A AMP Error B AMP Error A
10 RDOutput Signal Present BPresent A
12 RD LED's Controller A ISP GR OVL
13 RD Headroom/GainRed A 0..63:Headroom, 64..127:GainRed, 7-bit coded (0=32dB Hdrm, 64=0dB, 127=31.5dB GR)
14 RD LED's Controller B ISP GR OVL
15 RD Headroom/GainRed B 0..63:Headroom, 64..127:GainRed, 7-bit coded (0=32dB Hdrm, 64=0dB, 127=31.5dB GR)
2.13. REMOTE addressing
The structure of the P1200A object addresses in the d&b RIB is
identical to the A1 and E-PAC addresses.
2.14. Dimensions