Manualshelf

User manual

ManualsBrandsd&b audiotechnik ManualsComputer equipmentA1 Mainframe F-Series
11121314151617181920
2-8 P1200A User Manual
C7-TOP
CUT
GRISP
MUTE
OVL
-12 dB
-6
+6
0
HFA
C7-SUB
100Hz
GRISP
MUTE
OVL
-12 dB
-6
+6
0
C7-TOP
CUT
GRISP
MUTE
OVL
-12 dB
-6
+6
0
HFA
C7-SUB
100Hz
GRISP
MUTE
OVL
-12 dB
-6
+6
0
C7-TOP
CUT
GRISP
MUTE
OVL
-12 dB
-6
+6
0
HFA
C7-TOP
CUT
GRISP
MUTE
OVL
-12 dB
-6
+6
0
HFA
C7-SUB
100Hz
GRISP
MUTE
OVL
-12 dB
-6
+6
0
C7-SUB
100Hz
GRISP
MUTE
OVL
-12 dB
-6
+6
0
TOP-COINPUT A
1+
1–
2+
2–
AMP A
OUT A
MIX
SUB-COINPUT B
1+
1–
2+
2–
AMP B
OUT B
MIX
TOP-COINPUT A
1+
1–
2+
2–
AMP A
OUT A
TOP
INPUT B
1+
1–
2+
2–
AMP B
OUT B
TOP
INPUT A
1+
1–
2+
2–
AMP A
OUT A
SUB
SUB-COINPUT B
1+
1–
2+
2–
AMP B
OUT B
SUB
TOP-COINPUT A
1+
1–
2+
2–
AMP A
OUT A
TOP
TOP-COINPUT B
1+
1–
2+
2–
AMP B
OUT B
TOP
SUB-COINPUT A
1+
1–
2+
2–
AMP A
OUT A
SUB
SUB-COINPUT B
1+
1–
2+
2–
AMP B
OUT B
SUB
MIX configuration
TOP-CO - left slot (INPUT A)
SUB-CO - right slot (INPUT B)
If the P1200A mainframe is fitted with mixed
controller modules (a TOP module and a SUB
module), then both mainframe power amplifier
outputs share both Speakon output connectors -
the TOP signal appears on 1+/1– and the SUB
signal on 2+/2– of both the mainframe
Speakon outputs.
TOP-MONO configuration
TOP-CO - left slot (INPUT A)
MONO-adapter - right slot
One single TOP module is driving both power
amplifiers - a special mono-adapter (Z2380) is
fitted to the unused module slot and a blanking
panel covers the mainframe front slot.
SUB-MONO configuration
MONO-adapter - left slot
SUB-CO - right slot (INPUT B)
Here a single SUB module is driving both power
amplifiers - a special mono-adapter (Z2380) is
fitted to the unused module slot and a blanking
panel covers the mainframe front slot.
TOP-TOP configuration
left module (INPUT A) - OUT A
right module (INPUT B) - OUT B
If two TOP modules are fitted to a mainframe -
each driving one power amplifier channel -
then each mainframe power amplifier output is
connected to pins 1+/1– of its own output
connector.
SUB-SUB configuration
left module (INPUT A) - OUT A
right module (INPUT B) - OUT B
If two SUB modules are fitted to a mainframe - each
driving one power amplifier channel - then each
mainframe power amplifier output is connected to
pins 2+/2– of its own output connector.