Specifications

General Information
MAX12 Data Sheet
Version 3.0E, 02/2002, D2093.E.03
© by d&b audiotechnik AG 2002; all rights reserved.
The information presented in this document is, to the best of our
knowledge, correct. We will however not be held responsible for
the consequences of any errors or omissions.
Technical specifications, weights and dimensions should always be
confirmed with d&b audiotechnik AG prior to inclusion in any
additional documentation.
d&b audiotechnik AG
Eugen-Adolff-Strasse 134, D-71522 Backnang
Telephone [phone], Fax [phone]
CAUTION!
WARNING!
Safety precautions
Never stand in the immediate vicinity of loudspeakers driven at a
high level. Professional loudspeaker systems are capable of causing
a sound pressure level detrimental to human health. Seemingly
non-critical sound levels (from approx. 95 dB SPL) can cause
hearing damage if people are exposed to it over a long period.
In order to prevent accidents when deploying loudspeakers on the
ground or when flown, please take note of the following:
When setting up the loudspeakers or loudspeaker stands, make
sure they are standing on a firm surface. If you place several
systems on top of one another, use straps to secure them against
movement.
Only use accessories which have been tested and approved by
d&b for assembly and mobile deployment. Pay attention to the
correct application and maximum loading capacity of the
accessories as specified in our "Rigging accessories" manual.
Ensure that all additional hardware, fixings and fasteners used for
installation or mobile deployment are of an appropriate size and
load safety factor. Pay attention to the manufacturers instructions
and to the relevant safety guidelines.
Regularly check the loudspeaker housings and accessories for
visible signs of wear and tear, and replace them when necessary.
Regularly check all load bearing bolts in the mounting devices.
Loudspeakers produce a static magnetic field even if they are not
connected or are not in use. Therefore make sure when erecting
and transporting loudspeakers that they are nowhere near
equipment and objects which may be impaired or damaged by an
external magnetic field. Generally speaking, a distance of 0.5 m
(1.5 ft) from magnetic data carriers (floppy disks, audio and video
tapes, bank cards, etc.) is sufficient; a distance of more than 1 m
(3 ft) may be necessary with computer and video monitors.