Product Info

Page 4/26
equipment or external battery to the existing cables. Components of the WORK AIR
DL001 T U can only be modified by authorized DAirlab operators.
●● The sound level reached by the airbag during deployment could exceed the maximum
sound pressure level exposure value of 140 dB(C) according to Article 189 of Legislative
Decree 81/2008.
●● To make the best use of its functionalities, the WORK AIR DL001 T U must be worn
correctly, carefully following the instructions and warnings provided in this Informative Note.
●● Body piercings may increase any feeling of pain in the event of triggering.
●● Do not switch on the WORK AIR DL001 T U when it is not being worn or when it is being
worn but no work activities are being carried out. If used incorrectly the WORK AIR DL001
T could trigger and cause damage to property and pose a risk for people’s safety. Always
make sure that the WORK AIR DL001 T U has been switched off before transporting it. The
WORK AIR DL001 T U must be switched off when not in use.
●● After using the WORK AIR DL001 T U ensure the device is switched off before removing
it.
●● Never charge the WORK AIR DL001 T U while it is being worn.
●● Never leave the WORK AIR DL001 T U device charging close to flammable surfaces or
objects.
●● Keep children away from the WORK AIR DL001 T U in order to avoid all possible risk.
●● Whenever signs of malfunction appear, switch off the System, and contact the nearest
DAirlab Assistance Service.
●● Do not use the WORK AIR DL001 T U again after it has been triggered. Replace the
deployed device with a new WORK AIR DL001 T U.
●● In case of damage to the WORK AIR DL001 T U, contact the DAirlab Assistance Service.
●● The system is sensitive to sudden body movements and to impacts; therefore, never
deliberately perform movements that are not necessary for normal working activities, such
as jumping, acrobatics or particularly sudden movements. If you must perform one of the
movements described above, always switch off the Device first to prevent accidental
triggering.
● The WORK AIR DL001 T U is a new intelligent device designed for professional workers
working at height. The System can identify falls from a height of at least 1.20 m, as indicated
in chapter 3.4.
● During inflation of the airbag device pressure may be felt in the body region subjected to
the pressure of the airbag System.
● The WORK AIR DL001 T U should be used exclusively within a temperature range
between -10°C and 40°C. Prolonged exposure of the System to temperatures outside this
range may compromise its functionalities.
● The WORK AIR DL001 T U is subject to wear based on effective conditions of use. Before
using or putting away the WORK AIR DL001 T U, always check for any signs of wear or
damage.
● Even if it is operating correctly, contact the DAirlab Assistance Service once every 3 years
for a maintenance check and servicing (for a fee) of any components subject to wear. Correct
maintenance is essential for the correct operation of the system.
● Waterproof jackets or high visibility clothing can be worn over the WORK AIR DL001 T U.
● No tool belts, backpacks or the like must be worn over the WORK AIR DL001 T U.
● No keys, cellphones and other devices and accessories must be placed between the
WORK AIR DL001 T U and the body of the user.
● Before each use, the functionality of the WORK AIR DL001 T U device must be carefully
checked following the instructions in this Informative Note. Whenever there is a state of error
or any other malfunction, do not use the WORK AIR DL001 T U device and contact the
nearest DAirlab Assistance Service.
● The WORK AIR DL001 T U is composed of a chest protector and a central back protector
with pneumatic technology.