Product Info

Page 14/26
WARNINGS:
●● Avoid contact with petrol, oil, or any other type of chemical agent. These substances
could damage the component materials, compromising their original characteristics.
●● Do not rest or rub against walls, sharp edges, sharp objects, hot objects, fences or any
other type of object that could cut or abrade the product, causing irreversible damage.
●● For the temperatures of use of the WORK AIR DL001 T U, please refer to the
temperatures at which it was tested, indicated in Table 1. In any case, we recommend
avoiding exposing the protector to temperature extremes; climatic variations such as sudden
increases in temperature can drastically reduce the protection offered by the device;
moreover, the device should not be left in an outdoor environment at high or low
temperatures before use.
● The WORK AIR DL001 T U may have spare parts; for original DAirlab spare parts contact
the dealer that sold the product or consult the following link: https://dairlab.com/ricambi/.
● To replace any parts, refer to the Informative Note provided with the spare part
2.8. Information on the materials used
It is hereby certified that the materials that come into contact with the wearer have been
produced with suitable non-toxic and non-harmful products, as established by EC Regulation
1907/2006 (R.E.A.C.h) - Annex XVII. It is specified that, as established by Regulation EC
1907/2006 (R.E.A.C.h), such materials have no azo colorants capable of releasing
dangerous aromatic amines through the cleavage of one or more azo groups - Annex XVII.
Moreover, the articles marketed do not contain any Substances of Very High Concern
(SVHC), identified according to Article 59 and listed in the Candidate List published by the
ECHA (European Chemical Agency), in concentrations greater than 0.1% weight/weight.
2.9. Duration of the WORK AIR DL001 T U Protective Device
The duration of a protective device depends on its frequency of use and the care with
which it is looked after by the user
In any case, contact the DAirlab Assistance Service once every 3 years to request a
maintenance check or servicing (for a fee) of components subject to wear.
WARNINGS:
●●● DAirlab does not guarantee the suitability of the device and therefore shall in no
way be held liable if it is used after expiry of the time limit established for
servicing/maintenance if this has not actually been performed.
●● Check the WORK AIR DL001 T U for signs of possible wear, breakage or damage prior
to every use. Contact the DAirlab Assistance Service or an authorized DAirlab dealer in all
cases of doubt.