Product Info

Page 10/26
The Marking is indicated on a label stitched to the protector. The label contains the following
information:
Manufacturer’s Name and Trademark
D-Air Lab S.r.l.,
Via dell'Economia 64 c,
36100 Vicenza VI Italy
Manufacturer’s identification
CE marking certifying that the protective garment complies with the
requirements of Regulation (EU) 2016/425
Pictograms indicating the need to read the Instructions for Use
attached to the protector
Indication that the product and related electronic accessories must
not be disposed of with other household waste.
AIRBAG
Indicates that the protector is inflatable
(L)
Indicates that the protector is for exclusive use in a work
environment
CB
Specification of the body area protected according to the standard
EN 1621-2:2014.
(CB - Central Back) = Central protector, covering only the central
area of the back, this type of protector does not offer protection in
the shoulder blade area.
DC
(DC = Divided Chest) Specification of the body area protected, as
established by Standard EN1621-3:2018.
T+
Indicates that the protector is able to provide adequate protection
also in conditions of high environmental temperature 40°C.
T-
Indicates that the protector is able to provide adequate protection
also in conditions of low environmental temperature -10°C.
D
Indicates that the protector complies with the optional requirement
of distribution of the force transmitted for the chest area.
Size of the protector, supplied with indication of the distance
between the waist and shoulder of the user, for correct choice of the
protector. To find the size of the protected area, refer to table 5.
TYPE A
Specification of the size of the protected area, as established by
Standard EN1621-3:2018, TYPE A or TYPE B (smaller for TYPE A).
To find the size of the protected area, refer to table 5.
WORK AIR DL001
T U.1
(WORK AIR DL001 T U) Protector identification code; each
protector model is allocated a different internal code.
(.1 ) The numeric extension of the code .1 .2, identifies the size of
the Device. The value can range from 1 to 2 (.1 small size, .2 large
size)
08/2020
Month and year of manufacture
S
Size of the adjustment systems