User`s manual

The AXC-V112 ceiling mount accesory features
several holes on the top plate which allow for hook
clamps to be fixed to it, so up to 2 units can be
flown from truss structures.
M8x35 DIN912 screws
One slot on each side of the AXC-V112
accessory allows for the setting of the tilt angle of
the whole cluster by means of the M8x35 screws
supplied.
AXC-AT
Truss
The AXC-V112 can also be used to pole mount
up to one unit on top of one variant 18A or on a
tripod by making use of special adaptor (AXC-ZT).
AXC-ZT
AXC-V112
E) Quick release pins
Each cabinet variant 25A/112A includes 4 steel
heavy duty quick release pins stored on the rear
panel. Each cabinet variant 18A includes 6 steel
heavy duty quick release pins stored on the rear
panel.
All systems can be flown using steel/aluminium
rigging hardware located on both sides of the
cabinets. NEVER REPLACE QUICK RELEASE
PINS WITH SCREWS OR OTHER ELEMENTS!!!
Quick release pins
19
Manual del Usuario / variant / User’s Manual