User`s manual

9. Power off the I-7188XC controller, connect pin "INIT" to "INIT COM"
and then power it up.
10. Type "del" and reply "y" to delete the current driver.
7188x> del
Total File number is 2, do you really want to delete(y/n)?
11. Type "load", then press ALT_E and then type "pwm.exe".
It will take about 15 seconds to finish.
7188x> load
File will save to 8000:0000
StartAddr-->7000:FFFF
Press ALT_E to download file!
Input filename:PWM.exe
Send file info. total 260 blocks
Block 260
Transfer time is: 15.122000 seconds
Back to Terminal mode
12. Type "load" again, then press ALT_E and then type "autoexec.bat" .
7188x> load
File will save to 9037:000C
StartAddr-->9000: 037B
Press ALT_E to download file!
Input filename:autoexec.bat
Send file info. total 1 blocks
Block 1
Transfer time is: 0.060000 seconds
Back to Terminal mode
13. Type "dir" to make sure "autoexec.bat" and "PWM.exe" are well burned.
7188X> dir
0) PWM.exe 09/01/2002 22:21:23 66396[1035C]8002:0000-9037:000C
1) autoexec.bat 04/13/2001 16:50:27 20[00014]9039:000C-903B:0000
Total File number is 2 Free space=392240 bytes
14. Press ALT_X to exit "7188x".
15. Remove the connection between "INIT" - "INIT COM", reset the I-7188XC
controller.
I/O Expansion Bus for 7188X/7188E User’s Manual, Jun/2004 v1.4, 7PH-000-14---12