User manual

38
Remote control of the D10
General
The D10 can be operated using the F10 remote control
handset designed for the V10 integrated amplifier, or
using the F1 system remote control. If the F1 is used, it
must first be set to Hi-Fi mode.
On the following diagrams all buttons used for the control
of the D10 are marked '

'. All other buttons are
without function for the D10.
The D10 receives remote control commands from the
R LINK Master device (e. g. the V10 amplifier). It is
switched on using the 

 or 

 button, and is
switched off in common with the Master.
Note:
If no Master unit is present, a remote control set (FBS10)
can be used for direct remote control of the D10. It is
available as an optional accessory.