User`s manual

ROBOT . HEAD to TOE
Product User’s Manual – SD02B
Created by Cytron Technologies Sdn. Bhd. – All Rights Reserved
21
CONNECT
button has
changed to
DISCONNECT.
Click this button
to disconnect
8. Now, SD02B GUI is ready to control the stepper motor using SD02B. User may on/off
the motor, run/brake the motor, set the stepping speed, change direction,
reset/track/request the encoder value (number of steps), accelerate the stepper motor from
a specified initial speed to a final speed at desired acceleration rate and choose among
2/5/10 microstepping mode or non-microstepping mode using this GUI.