User`s manual

ROBOT . HEAD to TOE
Product User’s Manual – SC08A
4. Link up both SC08A with the cable. Following figure shows the sample connection.
Please ensure the 2510 connector is being connected. Users may use either U_1 or
U_2 to connect SC08A to another SC08A board.
5. For SC08A_1(board 1), a mini jumper should be put at “1-8” while for
SC08A_2(board 2) a mini jumper should be at “9-16”.
SC08A_1 : a mini jumper is set to '1-8'
Created by Cytron Technologies Sdn. Bhd. – All Rights Reserved 18
4 way cable to link
SC08A_1 and SC08A_2
UART cable to connect to
UC00A or microcontroller