Manual

ROBOT . HEAD to TOE

Product User’s Manual – MDDS10

6. MOTOR CONNECTION

Similar to the power supply, connection to the motor can be made either via the terminal

block, or it can be soldered directly to the bottom layer pad.

For Mixed mode, especially for RC input mode (or Breakout board with Joystick soldered),

each terminal block must be connected to the same side of the motor. For example, left

terminal block connected to motor LEFT and right terminal block connected to motor

RIGHT. Then, user can test it by controlling the motor by using RC controller. If the motor

give wrong direction, reverse the polarity of the motor connection at the terminal block.