Data Sheet

ManualsBrandsCytron ManualsData Communication and Human Input DevicesLoRa/RFM Long Range Transceiver Shield 915 MHz (North America)

 
ROBOT  .  HEAD  to  TOE 
Product  User’s  Manual  –  LoRa  Shield 
 
5.0  HARDWARE  INSTALLATION 
 
This section will show example installation of LoRa-RFM-Shield with  Arduino Uno as a                         
main controller. Besides Arduino Uno, other Arduino main boards such as  Arduino                       
Duemilanove ,  CT-UNO ,  Arduino Mega2560 ,  CIKU and  CT-ARM are also compatible with                       
this  shield. 
 
5.1  Arduino  Uno 
 
Arduino is an open-source physical computing platform based on a simple I/O board and a                             
development environment that implements the Processing/Wiring language. LoRa Shield can                   
be used together with Arduino Uno. Figure below shows example hardware connection                       
between Arduino Uno and LoRa Shield; it is simply stacking up the shield onto the Arduino                               
main  board. 
 
1. Stack  LoRa  Shield  on   Arduino  Uno .  Ensure  that  the  pins  alignment  is  correct. 
 
2. Install  antenna  as  shown  in  the  picture  below. 
 
Created  by  Cytron  Technologies  Sdn.  Bhd.  –  All  Right  Reserved  8