Getting Started Guide

ManualsBrandsCytron ManualsArduino ShieldsCytron Screw Terminal Shield for Arduino

ROBOT . HEAD to TOE

                                                               Getting Started Guide  – Cytron Screw Terminal Shield

Cytron Screw Terminal Shield

SHIELD-SCREW2

GETTING STARTED

GUIDE

V1.0

JAN 2015

Created by Cytron Technologies Sdn. Bhd. – All Rights Reserved 1

Summary of content (5 pages)

PAGE 1
ROBOT . HEAD to TOE Getting Started Guide – Cytron Screw Terminal Shield Cytron Screw Terminal Shield SHIELD-SCREW2 GETTING STARTED GUIDE V1.0 JAN 2015 Created by Cytron Technologies Sdn. Bhd.
PAGE 2
ROBOT . HEAD to TOE Getting Started Guide – Cytron Screw Terminal Shield Index 1. Introduction 3 2. Specification 3 3. Packing List 3 4. Requirements 3 5. Hardware Interface/Setup 4 6. Warranty 7 Created by Cytron Technologies Sdn. Bhd.
PAGE 3
ROBOT . HEAD to TOE Getting Started Guide – Cytron Screw Terminal Shield 1.0 Introduction Screw Terminal Shield extends all pins of the Arduino out to 3.5mm pitch screw terminals. It also has a lot of the utility provided by Arduino Protoshield, including: a large prototyping space of both connected and unconnected 0.
PAGE 4
ROBOT . HEAD to TOE Getting Started Guide – Cytron Screw Terminal Shield 5.0 Hardware Interface/Setup Screw Terminal Shield can be stack on any arduino main board for example Arduino Uno, Arduino Mega 2560, Arduino Mega ADK, Arduino Due and Arduino Leonardo.
PAGE 5
ROBOT . HEAD to TOE Getting Started Guide – Cytron Screw Terminal Shield 6.0 WARRANTY Product warranty is valid for 12 months. ● Warranty only applies to manufacturing defect. ● Damaged caused by misuse is not covered under warranty ● Warranty does not cover freight cost for both ways.