Data Sheet


ROBOT.HEADtoTOE
 ProductUser’sManual–MD30C


6.0HARDWAREINSTALLATIONANDGETTINGSTARTED

6.1BatteryandMotorConnection

Battery and motor can be connected to the MD30C either via the screw terminal block, or it                
can be soldered directly to the pad at the bottom layer of the PCB. Make sure the battery and                  
motor are connected to the correct port. Connecting battery to the motor port will burn the               
MOSFET.

NOTE:
For application where the current is > 20A, it’s recommended to solder the wire directly to               
thepadatbottomlayer.



BatteryisconnectedtoMD30Cviaterminalblock







CreatedbyCytronTechnologiesSdn.Bhd.–AllRightReserved 9
