Data Sheet
ROBOT.HEAD to TOE
Datasheet - MD25HV
7. ERROR LED INDICATOR
ERR LED Blinking
DESCRIPTION
2
MOSFET Driver Error
This happens when there is undervoltage error or hardware failure.
Please contact support@cytron.io for more details.
3
Overvoltage Error
Power input voltage has exceeded the maximum rating. If switching
power supply is being used, connect a motor shunt regulator or
rechargeable battery with same voltage in parallel with the power
supply. This is to absorb the regenerative energy from the motor during
deceleration.
4
Overheat Error
Board temperature is over 80℃ (176℉). This is just served as a warning.
The motor driver can still be safely operated.
Table 4: Error LED Indicator
Created by Cytron Technologies Sdn Bhd
– All Rights Reserved 6