Data Sheet

ROBOT.HEAD to TOE
ProductUser’sManual-MAKER-UNO
5.2 Using Arduino Uno Shield
Since Maker-UNO doesn’t have Vin, any Arduino shield that require Vin is not compable.
However, if the shield have opon to choose power source (either Vin or external voltage), it
can be used with Maker Uno (by using external voltage). For example:
● Cytron 3A Motor Driver Shield
● Cytron G15 Shield
● Cytron 10A Motor Driver Shield
● Etc…
The rest, it is fully compable with Maker Uno. For example:
● LCD keypad Shield
● Cytron XBee Shield
● Cytron SKM53 GPS Shield
● Etc…
So which Arduino shield is not compable with Maker Uno? Below is the example of shield
that need Vin and it don’t have opon to select power source.
● GPRS Shield V3.0
● Etc...
NOTE
How do I know either the shield is working with my Maker Uno?
You can refer to the product’s schematic (Arduino shield) and check for the Vin connection.
For further questions, please visit to our technical forum for similar question or post your
question there.
CreatedbyCytron Technologies Sdn Bhd –AllRightsReserved
Back to INDEX 10