Data Sheet

INTRODUCTION TO COMPONENTS
| 5
MAKER-UNO
Maker UNO, an Arduino UNO compatible board designed and developed specially for
students to learn coding and microcontroller. We named it Maker UNO to encourage
everyone to be a maker by getting started with this amazing board..
MAKER - UNO Features:
- SMD ATmega328P microcontroller(the same microcontroller on Arduino UNO) with
Optiboot (UNO) Bootloader.
- USB Programming facilitated by the CH340.
- Input voltage: USB 5V, from computer, power bank or standard USB adapter.
- 500mA (maximum) 3.3V voltage regulator.
- 0-5V outputs with 3.3V compatible inputs.
- 14 Digital I/O Pins (6 PWM outputs).
- 6 Analog Inputs.
- ISP 6-pin Header.
- 32k Flash Memory.
- 16MHz Clock Speed.
- R3 Shield Compatible.
- LED array for 5V, 3.3V, TX, RX and all digital pins.
- On board programmable push button (pin 2, need to congure as INPUT_PULLUP).
- On board piezo buzzer (pin 8).
- Utilize USB Micro-B socket.
- PURPLE PCB!