Datasheet

ROBOT.HEAD to TOE

Datasheet - MAKER-PI-RP2040

1. BOARD LAYOUT & FUNCTION

Figure 1: MAKER-PI-RP2040 Board Functions

Function

Description

Vin Terminal

Connect to any power source within 3.6 - 6V.

LiPo Battery Connector

Connect to Single Cell LiPo / Li-Ion Battery

The battery is rechargeable via USB.

∗ The battery is protected from overcharged and over discharged. If

the board cannot be turned on when the battery is connected,

please charge the battery to activate the battery protection

circuit.

Power LED

Turn on when powered up.

On/Off Switch

Turn on/off the power.

Debug Port

Debugging port of the RP2040.

Micro USB Port

Used for upload programs from PC.

Can also be used to power up the board.

Reset Button

Press to reset the RP2040.

Boot Button

Press and hold this button while resetting the RP2040 will enter

the bootloader mode. Used to load the Micropython/Circuitpython

or custom C/C++ firmware.