Data Sheet


ROBOT.HEADtoTOE
ProductUser’sManual–ESPWiFiShieldRev2.0




7.2CreateasimpleWiFiserverusingArduinoUno+ESPWiFiShield

1. Stack ESPWiFi Shield onto compatible Arduino Board. For this example, Arduino          
Unoisused.
2. SelectD2forRXandD3forTXpin.
3. MakesuretheslideswitchisswitchedtoRUNmode.


4. Download CytronWiFiShield library from link provided at product page and extract          
thefilestoMyDocuments>Arduino>Libraries.

CreatedbyCytronTechnologiesSdn.Bhd.–AllRightReserved 11
