Data Sheet

RB-Cyt-101

Cytron ATX Power Supply Breakout Board (Right Angle)

This is a breakout board for ATX Power Supply. It comes pre-solder and tested. Connect this board with an ATX

Power supply where you can get it from most of computer shop, you will get 3.3V, 5V, and ±12VDC to supply to your

project. This breakoud board comes with:

 24-pin ATX connector (Right Angle)

 Support 24-pin ATX or 20-pin ATX

 ON and OFF toggle switch

 Power Standby LED indicator

 Power OK LED indicator

 3.3V, 5V, -12V, +12V, GND, PS_ON, 5V_StandBY, PWR_OK are extended out

 The pad is suitable with either Green Terminal Block, Blue Terminal Block, Turn Pin or Header Pin.

The terminals and PCB stands are not included, so please get the preferrable terminal to connect the power to your

target board.

PAGE 1
RB-Cyt-101 Cytron ATX Power Supply Breakout Board (Right Angle) This is a breakout board for ATX Power Supply. It comes pre-solder and tested. Connect this board with an ATX Power supply where you can get it from most of computer shop, you will get 3.3V, 5V, and ±12VDC to supply to your project. This breakoud board comes with:        24-pin ATX connector (Right Angle) Support 24-pin ATX or 20-pin ATX ON and OFF toggle switch Power Standby LED indicator Power OK LED indicator 3.