User`s manual

Version 1.1
Copyright by
CYTECH 2006
5. Turn the front Adjustment Knob (02
10 B) counter clockwise, and insert the
Handlebar Post (02 30 05 SX) into the
Frame. Next, bring the Handlebar Post
to the desired height, and turn the
Adjustment Knob clockwise to retighten
until it is snug.
6. Set the stop block (02 30 06) in the
indicated hole in the lower part of the
Handlebar slider. Next, loosen the
Adjustment Knob (02 10 D) in the
Handlebar Post.
7. Remove the front M8 x 8mm grub
screw (02 30 06) from the upper part of
the Handlebar slider (02 30 02 SX). Slide
the Handlebar onto the Handlebar Post
until it stops.
Do not over tighten the Adjustment
Knob. Make sure the Handlebar Post does
not slide while riding.
02 10 B
5
6
02 30 06
02 10 D
7
USER’S MANUAL – S/X-SERIES
www.indoorcycling.com ENG 7