Specifications

Cyrus III Amplifier CAUTIONS
3
English
Your Cyrus III Amplifier is factory set to operate from a
fixed mains supply voltage, which is marked on a label at
the rear of the unit. Before connecting, check that this
voltage is the same as your mains supply, i.e.
230V Products Voltage Range 220V-240V
115V Products Voltage Range 110V-120V
Always follow the instruction handbook and retain it in a
safe place for future reference.
Before proceeding with installing the Cyrus III Amplifier,
ensure that the following items are included in the
accessory box:
• Instruction Manual
• Power Cable
• Remote Handset
• 4 Loudspeaker Plugs
• Guarantee Card
After removing these items, please retain the packing for
future use.
Install the amplifier in a well ventilated location where it
will not be exposed to high temperature or humidity.
Avoid installing the Cyrus III Amplifier in a location
which is exposed to direct rays of the sun, or near to hot
appliances or radiators. Placing and using the amplifier for
long periods on heat-generating sources will affect
performance and may damage the cabinet. Installation in a
damp or dusty environment may result in malfunction or
accident.
The Cyrus III Amplifier is supplied ready for use in your
location. Care has been taken to ensure that the power
supply requirements are correctly set. Consult your
Mission distributor to arrange for conversion of your
Cyrus III should you move to another area with a different
mains voltage supply.
It is important not to allow any liquid or foreign object fall
into this unit. When routing the power cord avoid running
it over or near sharp objects.
If the amplifier is not to be used for a long period of time,
unplug the unit from the mains power supply.
This unit contains no user serviceable parts, therefore
never
remove any panels from the unit or attempt to
service the unit. In the unlikely event of failure, please
refer to qualified service personnel.
UNPACKING
LOCATION
RE-LOCATING
PRECAUTIONS REGARDING INSTALLATION