Operating Guide

5
Optional Settings
Turn LED System ON when an outlet is switched on: Plug the power supply to a switched
power source such as audio receiver’s “Switched Power” or wall outlet that is controlled by a
wall switch. Make sure the outlet is switched on. Using the POWER button on the controller,
make sure the LED System is off . Press and hold the MODE button for 3 seconds. Now the unit
will turn on automatically every time the outlet is turned on.
LED System remains OFF when an outlet is switched on: In a similar process, press and hold
the PAUSE button for 3 seconds. The system will remain off every time the outlet is switched
on. In this mode, the system can only be turned on from the controller by pressing the POWER
button.
Technical Support
CYRON’s primary goal is 100% customer satisfaction. You may call our technical support line
or contact us via email 24/7.
[e-mail] 888-297-6660 x106
In order to continually improve our products we welcome all comments about the product you
purchased.
Thank You!