Specifications
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
1
HDMI OUTPUT: Connect to a HDMI equipped display or AV receiver
for video and audio output.
2
OPTICAL OUTPUT: Connect to an amplier or active speakers with
an optical cable for LPCM 2 channel digital audio output.
3
AUDIO OUTPUT: Connect to an amplier or active speakers with a
3.5mm mini-jack cable for analog audio output.
4
MENU Button: Press this button to enter the OSD (On-Screen
Display) menu and press it again to make a selection.
5
+/− Button: Press these buttons to:
When in the OSD menu
• Navigate up/down the OSD menu.
• To adjust the value of a menu selection.
Under normal operation (outside of OSD menu)
• Press the '-' button to perform automatic calibration of the
output signal when in PC MODE only.
• Press the '+' button together with the 'MENU' button to switch the
output resolution to XGA@60 (1024×768).
• Press the '-' button together with 'MENU' button to switch the
output resolution to 720p@60.
• Press both the '+' and '-' buttons at the same time to reset the
device to the default settings.